Interesting Ice “Cubes”

More like ice blocks!  Our refrigeration is made by Sea Frost, with two cold plates in the freezer section - one for 12VDC and one for engine driven.  We found the ice cube trays (I guess you would call them trays) to be intriguing and were anxious to try them.  They are hollow stainless vessels which are filled with water, and then a divider with multiple block cutouts is inserted.  They are then placed beside the cold plates and secured by a metal rod.  Once she was back in the water we finally got the opportunity to experiment.  So, as advertised, within 30 or so min of putting the trays on the cold plate, we had ice!  Okay, that is great but the other night J went to make us a couple of cocktails (I have a FANTASTIC new mint/lime syrup which I made to pour over fresh fruit, but it came out so good, we made slightly modified mojitos out of it!) and we weren’t too sure how to go about getting them out!  The trays are solid stainless steel, so it isn’t like you can just twist them out.  So, in the moment we ran some hot water over the trays, hoping it would dislodge them and eventually it did (but surely there is some easier way, which I’m sure we’ll figure out!). 

Next challenge was dislodging the actual ice from the inserts (thankfully not as difficult as the initial extraction).  Finally, we had our ice cube (yes, singular as you only need one of these!).

By the time we both finished our cocktails, the cube had barely melted!  I guess that will come in handy when we are cruising in hot climates, only need one per drink and they will likely last multiple drinks!! :)

Update:  J just did some online reading on the Sea Frost ice trays…it appears we need to take the ice trays out some time before intended imbibing of libations in order for it to melt around the cubes so they will come out without such a fuss.  So much for spontaneity L

Up I go!

So this past weekend we took advantage of the calm winds to get some stuff done with the sails and the mast.  We were able to get the mainsail bent on a couple weeks ago, but when we purchased her there had been some issues with the in-mast furling so the light winds allowed us to play with that a bit.  Finicky things, those in-mast furlers, especially this one!  We never had a problem with the Selden in-mast furling on Knotty, but Tango has been a bit more of a problem child!  We also got our headsail bent on, which now opens up a lot of room in our forward cabin, or what J refers to as our “storage closet”.

So, back to the in-mast furling...  J and I both agree that when we leave in a few years, we do not want to leave with this mast.  It is just too temperamental and don’t want to have to worry about it when we are in the middle of the ocean or if we hit rough weather.  We’re using the Navy training J had for 20 years and trying to apply KISS (Keep It Simple Sailor) to all essential systems; so, we’ve been entertaining some different options.  We can buy a new mast ($$$$) or we can try to find a used one.   J has been talking to a fellow Mason 44 owner who recently upgraded his spar with a carbon fiber mast.  Depending on the condition of the mast, we may buy that one.  But before we can even consider replacing the mast, we had to know exactly how tall Tango’s mast is.  That meant one of us was going up the mast to measure and, seeing as how I am the lighter of the two of us, it was a no brainer who it was going to be.  Plus, even with the assistance of the winch, I’m not sure I could have hoisted J up there!

Thanks to my repelling experience when I lived in San Diego, and the awesome gift my big bro got me years ago (which I’m so happy I kept through all our moves), I put on my harness and up I went!

Me, repelling in San Diego, 2007 (note this is not said awesome harness)

47' 7.5" above deck (to be exact) :)

Other side of our marina - shame we're the only full dock.

We wanted to run our flag halyard lines last weekend as well, but the line we had previously purchased for Knotty’s port flag halyard (but never got around to putting on) was too short, so looks like I’ll be taking another ride back up the mast to do that.   Oh and when I was at the top of the mast I discovered that the spinnaker halyard is not run correctly (runs around the front of the headsail halyard…oops!) so that will need to be re-run as well.  The positive to all this is that while I’m not afraid of heights, I wouldn’t say I’m a huge fan of them – these hoists up the mast are certainly forcing me to be more comfortable and giving J a good workout! 

She's home!

Hello!

Yes, it has been awhile (again) and the excuse is the same – we’ve been very busy with the “Fleet”… 

As of our last post, we have splashed Tango and she is now resting comfortably in our marina a handful of slips away from Knotty.  We scrambled to get everything we HAD to get done in order to get her in the H2O but unfortunately, once we got her in we were disappointed to discover that she would not be able to sail home.  Turns out there were some issues with her rigging which prevented us from sailing.  Right before we launched her we replaced the fuel injectors on the engine and we had changed the oil when we hauled her in November so thankfully her engine worked like a champ.  We, along with some of our closest friends, made the most of the beautiful day, fired up the iron genny and made our way home. 

It was a beautiful day and we were grateful to at least be heading home.  Since she got to our marina we’ve continued our projects and we’ve moved aboard. We are just about done moving everything off Knotty and once complete, she will be hauled and be prettied up for her next owners (which we are still looking for… Catalina 350 Mk II for sale, for anyone interested!!  LOL!) . 

We had hoped to get Tango out on the H2O for the long Memorial Day weekend but since she wasn’t/isn’t ready, we ended up taking out Knotty for a couple of days.  Our good friends S&A joined us - seems Memorial day with them has become a bit of a tradition.  Last year we gunkholed around the bay for 4 days and wanted to the same this year, but the weather was not on our side.  We still had a great time and it was the break that we all needed.  We pushed off around 5PM on that Friday and headed up the Potomac to the river just north of us, St. Mary’s River.  Short sail but it was so nice to be swinging on the hook and disconnected for the night.  The next AM, we were making our way further north towards Breton Bay but decided, with the direction of the wind, that we’d be better off cutting across and staying the night on the hook in the Lower Machodoc (no fun sleeping on the hook with no wind, gets very hot!).  We ended up calling it an early day and dropped anchor around 1500, which was nice.  Typically we are pulling in later in the day, getting started on dinner and then heading to bed.  This time, we all just relaxed - sat in the cockpit with a cold one, read our books or took naps.  J was the brave one and got in the H2O and scraped some barnacles off the prop (thankfully the H2O up river has fewer jellies than where we are!).  That evening, as we sat in the cockpit we got to take in 5 different firework shows – certainly a treat!

The next AM we decided to head back south and visit a marina on the VA side that one of our boat neighbors, S/V Tadby II, frequently visits.  They have a brunch on Sundays which definitely didn’t disappoint!  Due to the weather (hot temps and no wind), after a gluttonous feast, we decided to head back home.  While we were sad to be heading back, J and I had much left to do on Tango and we wanted to try to take advantage of the long weekend to get some stuff accomplished. So, the rest of the weekend was doing more projects and getting a bit more settled.   Still not there, but we are getting closer each day! 

Sharing a comment...

J made a comment on our last post that I wanted to share. I didn't want it to be missed ;)

~~

I discovered yesterday that inhaling paint fumes for almost 14 hours straight makes one a bit loopy.

Yes, it's been a long road, and yes there's more ahead, but there's been a lot of progress this winter that is bringing us closer to the realization of a dream. We work hard now so, as Tom Sawyer reminds us, twenty years from now we will not be disappointed by the things we didn't do. In a few short years we will throw off the bowlines. Sail away from the safe harbor. Catch the trade winds in our sails. Explore. Dream. Discover.

Another week or so and this portion of our refit will be complete (or close enough to get her home). There's still plenty of refitting to do over the next three years, but those portions should be considerably less hectic...until the last 3-6 months. I think Kel is still dreading her first major provisioning :)

Catching up - FINALLY!

I know, I know…  For the few who follow our blog you probably thought we are like many other blogs which start off strong and then fizzle out.  Well I am here to tell you that is not the case!  Sure, we have nothing but excuses as to why we haven’t posted, but at least we’re still here!  Hopefully, in the very near future, our posts will go back to being more frequent but until then, let us get you up to speed.

Okay, excuses – here they are…  Non-boat wise we’ve had a lot happen in the last few months.  J went on terminal leave from the USN, we had the retirement party with good friends and good beer.

J began the search for a job which was then put on hold by our 16 day vacation to Vietnam (an amazing trip!).

Dinner in Nha Trang

Eating fried crickets in Dalat

Tapioka harvesting in the Central Highlands

Elephant Falls

As soon as we got back, the job hunt was back on.  Shortly after our return J officially retired from the USN – 29 Feb marked 20 years of service (way to go J!).  We’re not done yet….  J had some interviews, accepted a position and started his new job, I celebrated a birthday (the big 3-2), we celebrated Easter with good friends, attended my sis in-law and big bro’s baby shower (can’t wait to be an Aunt – only another few weeks and Lil H will be here!), and we’ve both had work travel (actually I am writing this from San Diego where I am for 10 days which I might add couldn’t have come at a worse time since we are scrambling to get Tango in the H2O)…  So, you could say we’ve been a bit distracted with non-boat stuff BUT boat wise, we’ve been busy too.  Of course (in true boat fashion) things have taken longer than we expected, or we were unable to find parts when we needed them or we’d find more that needed to be done than we thought.  Since we are so far behind, it will just be easier to give you a bulleted list of what we’ve been working on.   Here goes…

• Removed rotted core from around chain plates
• Epoxied void created by removing rotted core
• Reinstalled/rebedded chain plates with butyl tape.  Before we reinstalled them, we had a local machinist inspect them and clean them up for us – thank you Mr. Langley!
• Replaced/rebedded various leaky deck hardware… between bent screws and the extremely small and tight bow anchor locker this was not a fun task!  Due to it being such a tight space, I drew the unlucky straw and got to spend the majority of the time up there.  J was topside removing the hardware and I was below helping remove the rusted nuts.  Same thing when we received the new hardware (West Marine didn’t have the 6in screws we needed), J was top side as I was in the locker installing the nuts on the backside.   It was definitely a two person job.  
• Constructed winch covers… unfortunately I need to re-do a couple of them. After a fit-check, it turns out the base is a bit too small so if I want them to cover the entire winch (which I do) I’ll have to redo a couple.  No big deal as they are not hard and don’t take long – just a bummer that they weren’t “goldilocks” the first time.
• Made first hatch cover and it came out perfect!  I’ll make the other five soon, but other stuff right now it taking priority (read: getting her in the H2O so we can move aboard!)
• Finished the bottom repairs (blisters/voids/grounding damage)
• Sanded 
• Epoxied
• Re-sanded 
• Prop back for servicing and now she looks brand new!
• Cleaned/treated/repainted mast & spreaders where corroded.  It’s always interesting working with chemicals where it clearly states “warning – cancer hazard” YIKES! (Yes, we wore safety gear! 
• Cleaned all mast hardware (thank you Prism Polish – see earlier posts)
• Received all parts to build up the rigging (all Sta-Lok fittings) and built up all but the inner forestay.  So happy we are doing this on our own.  The process to do it, while it takes some time to measure and lay it out, the actual building part is very easy and doesn’t take too long.  Whoever came up with the theory behind the Sta-Lock fitting is a genius!
• Big Purchase from West Marine – when purchasing rigging, trawler oil lamp and wire cutters (a few of the big ticket items) a wholesale, military appreciation sale comes in very handy!!  
• Completed the plumbing under the galley sink
• New pump, filters, sink drain plumbing, and sink baskets
• Sanded, varnished and installed  the teak accessories (spice rack, paper towel holder and toilet paper holder)
• Repaired broken light in forward closet
• Replaced almost all cabin dome lights and reading lights with white and red LEDs
• Installed her USCG documentation numbers
• Serviced two of four mast winches
• Replaced broken latch on trash bin
• Replaced locking arm on navigation station desk
• Removed old Port of Hailing from stern and applied her new Port of Hailing.  While J and I won’t be leaving our day jobs to start a career in boat lettering, overall it didn’t come out too bad!  
• Removed/refilled/reinstalled LPG tanks
• Put interior back together (cushions/cabinets/etc)
• Repaired broken dome light in saloon
• Wired DC outlet for the TV
• Replaced the shower sump pump filter
• Sorted through numerous lockers full of spare parts
• Cleaned fridge and stove
• Replaced air conditioner filter (resembled a fuzzy creature) and cleaned vacuumed A/C compartment
• Installed oil lamp which has been passed down from our first boat.  Moondance came with the lamp; we took it with us when we bought Knotty and now it has come with us again onto Tango.  Have to admit, it looks great mounted above the berth in the aft cabin.  
• Replaced steaming/deck combo light
• Solicited the handiwork (again) of Mr. Langley and had our headstay mast pin remanufactured.  With so much of this boat being metric, we were unable to find this pin anywhere!!  So, took it to Mr. L and he had it done for us in an hour!
• Cleaned and treated the dodger and bimini. We were a little leery when we began applying the waterproofing and it was so dark, but within a few hours it was dry and you couldn’t tell we had applied anything!  The downpour we had a couple of hours later proved our work was a good investment, the H2O beaded off like a champ.
• Treated the Strataglass on the dodger
• Washed all the running rigging… I felt like the mom from Willy Wonka, washing the clothes in the large tub of water, agitating it with an oar J
• Cleaned and treated all the hardware on the running rigging(again, thank you Prism Polish!)
• Let out the 200ft of anchor chain, cleaned out the anchor locker and installed Dri-Dek (hopefully this will help keep the chain out of any standing water which may be in there when we weigh anchor)
• Ran the running rigging
• Replaced mast head light
• Reinstalled the anemometer, wind vane and VHF antenna
• Reinstalled the rest of the full enclosure

We had hoped to get Tango in the H2O towards the end of April – well that date has come and gone. This past week, the barrier coat (at least the first two coats) was applied and today J will apply the final and then two coats of the anti-fouling.  As I said earlier, really bad timing for me to have to travel as he is carrying the full burden of doing all of this stuff by himself.  Add to that that we “may” have a buyer for Knotty so on top of everything else, he’s been busy trying to get her ready for a potential buyer.  I say ‘may’ because they are also looking at another Catalina 350 Mk II (we’ve got ourselves some competition) so we’ll see what happens with that.  I may be going home to a bare boat if they decide they are interested in ours!  

With all the setbacks and delays, hopefully we can get her launched and “home” in a week or two.  It’s been a long winter and a bit stressful here recently so we’re both very anxious and really looking forward to getting her back in the H2O and moving aboard!!

p.s. Ill post some pictures of the above progress soon... 

blows off the dust...

Wow - over 2 months since our last post!  We've been very busy, with lots going on (which means lots to share) and hope to get a blogpoat up this weekend.  Stay tuned :) 

Our Pubescent Sailboat

When we hauled Tango out of the water for her pre-sale survey, we noticed, after a quick look over, that she had a few blisters on her hull.  For those unfamiliar, blisters are essentially boat acne.  Per Don Casey “Fiberglass blisters occur because water passes through the gelcoat. Water soluble chemicals inside the laminate exert an osmotic pull on the water outside, and some water molecules find a way through the gelcoat.  As more water is attracted into the enclosed space, internal pressure builds. The water molecules aren’t squirted back out the way they came in because they have combined with the attracting chemical into a solution with a larger molecular structure. Instead, the pressure pushes the covering gelcoat into a dome – a blister.”  We knew that these were going to have to be taken care of once we got the boat home and out of the water.  

When we hauled her for the winter, we noticed that, upon closer inspection, she had more than we expected – at least a dozen or so.  She had numerous layers of old, flaking paint on her bottom, which needed to be removed, and with the blisters we were seeing, we were now faced with two different options.  We could have her soda blasted (similar to pressure washing with baking soda) or we could have the first layer of gel coat and fiberglass mechanically peeled. The former option would require, once the soda blasting was complete, that all the blisters be “popped” (oddly enough this result is much like squeezing a zit, but what comes out of boat blisters is an acidy liquid that you do not want to touch), opened up, washed out, and then allowed to completely dry out, and then finish with a repair.  This is a significant amount of work, and may not guarantee that you will fix the problem.  With the latter option, it would be the more (much more) expensive option, would be less work for us, but would give us a better chance of not having blisters in the future.  The catch here is that once she was hauled, while we saw a few more than we expected, we didn’t really know the extent of the problem and wouldn’t know until we did the soda blast.  However, if we did the soda blasting and found many more blisters (hundreds instead of tens, we’d be out the money we spent for the soda blast which is, by no means, inexpensive, and may still need to have her peeled, which is quite expensive.

So, in the end we decided to just to do the soda blast, assess the full extent of the problem and repair the damage.  In all the reading we’ve done, shallow gelcoat blisters will not sink your boat.  They are not ideal for the hull, reducing her hydrodynamics, but they are not detrimental to the structural integrity of the boat unless allowed to go unchecked and develop into deep blisters (penetrating the second layer of laminate and beyond).  She now sits in the yard, with a completely bare bottom down to her gelcoat. 

Tango before her bottom was soda blasted

Soda Blast Prep

Tango after soda blast

We’ve discovered a lot of blisters (more than a 100), all but three of which are only through the gel coat with the remaining three only into the first layer of fiberglass.  This is relatively good news, but this also means we have a lot of work ahead of us.  Each one of the blisters will need to be fully opened up, grinded out and then built back up with epoxy ( a combination of resin, hardener, and colloidal silica). The down side is this may only be a band-aid if the gelcoat is prone to blistering, which it seems to be.  In that case we either have to live with the blistered bottom and fix them as they come up, or go ahead and have her peeled and repaired, shelling out several thousands of dollars for an essentially new bottom.  While the money set aside for her current refit is quickly dwindling, we’ll look at her again in two years when we have her hauled again.

A couple of small, surface blisters

The blisters are the dark spots, her port aft hull area has quite a few.

One of the three bad blisters on Tango

Surprisingly, blisters are not that uncommon and it really is a game of chance as to whether your boat will have them.  Sometimes they tend to be seen on particular brands of boats, which may mean that they are due to the way in which the hulls are laid or the ingredients the manufacturer  used for the gelcoat.  Others seem to happen by complete chance, such as those on our Mason 44.  Maybe they waited too long between spraying the gelcoat and laying the first layer of fiberglass, maybe it was a bad batch of gelcoat, but one thing is for sure; there isn’t anything you can do as an owner to cause blisters, but once you have them, they’re yours to deal with  I guess when you compare our boat to others with blisters, it could be worse…

Not our boat but an example of a serious blister problem.

In the end, considering our boat is an adolescent (16 years old), we shouldn’t be so surprised she is suffering from an acne breakout.  Let’s just hope she doesn’t go through that lashing out phase where she hates her parents.

got gas?

When we first moved aboard, though it was easier than I thought it would be, it definitely took an adjustment to get accustomed to doing things, well…differently.  While I’ve said to many folks that we find living aboard “easier”, I don’t necessarily mean it in its literal sense.  Easy for us tends to mean “simply”.  We don’t have 5 or 10 pairs of jeans, or countless t-shirts.  If we want to get a new pair of jeans, an old pair on the boat has to go – it’s a one for one swap.  Living in a small space, we no longer buy the economy size pack of paper towels, with 8 rolls, or the 12 pack of toilet paper.  This makes us more conscious of our usage (at least with the paper towels), thus wasting far less than we might have on land.  Living aboard has forced us to think differently about how we approach many things.  For example, on the boat we have a small 8 cubic foot fridge; so when we go grocery shopping, we only shop for the next 4 days, since that’s all there’s room for.  I remember the first time I went to the grocery store after moving on board, with each item I placed in the cart I had to visualize (in particular, anything that was cold and/or required refrigeration after opening) whether there would be sufficient space.  I couldn’t buy more than I had room to store in our new down-sized “kitchen”. 

One of the biggest differences of living aboard is that there is not an endless supply of resources, such as water, propane for cooking, and even electricity (when we are not at the dock, connected to shore power).   On Knotty we have 88 gallons of fresh water - when that runs out, we have to refill the tanks.  In the winter that means driving up to the marina office, filling two 6 gallon jerry jugs, and lugging them back to the boat.  Depending on how many times we are willing to do that, in the often bitter cold and piercing wind, determines how much water we have on board.   Even in the summer, when the task is much easier, it still requires that we go out and attach the hose and filter to the dock-side spigot , run the hose to the bow to fill the forward tank, then monitor it until full, reversing the process once complete.  So living aboard has taught us a lot about conservation. 

I recently talked about how we utilize baking as an additional heat source in the winter.  Well, the other evening, which happened to be my night to cook, I mentioned to J that  we should go ahead and fill up our propane tank the next day.  We’ve been doing a lot of cooking, so I figured we would be running on the low side.   Just for giggles (though I wasn’t laughing later) I thought to myself what I would have to do if I ran out of propane in the middle of cooking.  I was in the process of making one of our regular meals, a turkey Tex Mex, and had just put the ground turkey into the hot pan to brown.  No sooner than finishing my thought, about my hypothetical plan B, did I hear a putter, putter, and then poof… Yes, I had run out of propane!  With that, I turned off the LPG solenoid and prepared to finish dinner up in the cockpit, on the grill.

Upon going topside, I checked the LPG and sure enough, the pressure gauge read zero.  I guess we did more baking then we realized. 

So, I proceeded to go back below, bundle up and gather all my remaining ingredients, and spent the next  20 minutes standing in the cockpit, taking in the quiet evening while I completed cooking our meal. 

Implementing Plan B

The stern pulpit seats serve as great counters :)

I will admit that at first I wasn’t happy about the situation, but it wasn’t because of being outside in the cold, it was because I had just thought to myself how much I didn’t want to have to implement my Plan B.  As I stood there, laughing at myself, I made a mental note to check the propane more often. 

“So, what do you do in the winter?”

You’d be surprised at the number of people, when we tell them we live aboard, who ask that question.   Typically that follows with additional questions like “Well, doesn’t it get cold?” and “What do you do about heat or when it snows?”  Our responses are along the lines of “We do the same as you do living on land.”  We have heaters, three of them to be exact, which are used instead of our reverse cycle A/C (which stops working when the H2O temps get below 50 degrees).  I will note that all said heaters are on full blast right now since it was so cold today (10 degrees this AM with the wind chill) and I came home to icicles on the transom!! In addition to the heaters, we wear sweatshirts , warm cozy pants, and always have on thick socks and slippers.  When it snows, we shovel the dock and the deck of the boat (who knew a dust pan would make such a great shovel for a boat!).  So really, it isn’t much different from land life.  There are a few things, though, that we’ve learned after already spending our first winter aboard.  

First, no matter how hard we try, the bottom 2ft of our boat above the floor will ALWAYS be cold; after all, our house is constantly submerged in about 2ft of H2O (which this AM was about 37 degrees!).  Kind of funny when you think of it, we are always standing in water up to our knees : )

Second,  boats sweat...  Last year, we were quite alarmed when we looked in the bilge to find a lot of H2O, which shouldn’t have been there!  We have a dripless shaft, which equates to a dry bilge.  We knew that during times of heavy rain, sometimes some water would get in through the cockpit shower locker and through a small leak we had on the headstay stem fitting.  However, neither of these should have produced as much water as we had.   To make matters worse, we removed the water and about an hour later, there was more!  Where could it have been coming from!?   We thought the boat had a leak and when you live in something that is supposed to remain afloat, taking on water from unknown places is not fun!  Needless to say, we finally determined what it was – condensation…  The boat is significantly warmer than the water it sits in, so naturally condensation formed.  This year we know to expect some water and we are very conscious when it comes to humidity, e.g., we do more cooking in the oven, than on the stove top to avoid the additional humidity from the steam and we keep the dehumidifier running.  We also learned last year just how much heat the human body puts off as we found a significant amount of condensation under our mattress.  This is a place you do not want moisture as it can lead to mold and ruin mattresses (they are not cheap!). Last winter we pulled the mattress away from the bulkheads every AM and then on the weekends propped up the mattress to completely dry it out.  This was not ideal…  So, for this winter, we were determined to figure out a better solution.  Allow me to introduce Hypervent Condensation Prevention Matting – another great product!  It’s a Spun Polymer which is bonded to a breathable fabric layer, and does not compress allowing an open layer of air to form.  We put some under our mattress and, so far, have had no condensation – yay! 

Lastly, bake often!  Not only does it help with the condensation prevention but it helps heat the boat.  We have our favorites –Greek Shrimp (thanks Nan), or Artichoke Chicken (thanks LT).  We also do breakfast breads like pumpkin apple bread (thanks C) and hopefully this weekend, I’ll attempt some homemade rustic bread, yum!  Although, the only downside to the delicious and comforting baked goods is the resultant increase in our waistlines…  I guess if we were in the northern latitudes, that wouldn’t be such a bad thing, so maybe we are just practicing for the future… or at least that is what I’m telling myself… :) 

Faucets, Sink Drains and Mast Steps – Oh My!

We’ve been busy working on Tango since she was hauled out of the H2O almost 6 weeks ago. She is completely torn apart and while we’ve made some headway on things, we still have a long way to go…

What a mess!

Poor Tango!

We took advantage of the long holiday weekend and the great weather we’ve had to get a few things done on the boat. Our to-do list is literally pages long and it seems like each time we mark one item off, another 2- 3 get added. Or, what we think will only take 2hrs to do, end up taking 2 days because we don’t have the right tools or materials. I guess that is to be expected when we’re refitting a 16yr old boat, which was built in Taiwan so nearly everything is metric and hasn’t had much, if any, preventive and periodic maintenance done on her. So why would this weekend be any different? We had an old faucet which I didn’t care for and thought it was an eyesore (it was at one point white, I think, but had turned to a dingy yellow color), so we decided to replace it. With Tango we wanted a higher faucet neck because the one we have now on Knotty sits relatively low so it makes it difficult to clean pots and pans. So we got a really nice sterling silver faucet from Lowes and two new drains (the old ones were extremely corroded and rusty) which we figured the replacement would be a one day job. Well three days later, it still is not complete, but we are getting there. The faucet went in with no major issues (J did a great job and its looks awesome!), the drains did as well (with the exception of the quick trip to Lowes to get plumbers putty) but the plumbing under the sink has been the clincher. The two drains were routed, let’s say a bit unconventionally so we’re still fighting with the plumbing portion. We figure may as well do it right now, and not have to deal with fixing it again later… Here’s hoping we can get that one done and marked off our list soon!

The old faucet...

The new faucet...

When we hauled Tango for the season, we took off her mast so that we could work on that as well. That too has its own to do list which is at least a page in length. Our mast is keel stepped which means it does not connect to the boat on the deck but rather, it goes through the boat all the way to the keel and rests there. Keel stepped is preferred for offshore sailing.

The mast step was covering in dirt and debris and needed to be cleaned up before we could inspect it and determine if that too would need replacement. After using the good ole Shop-Vac and some Prism Polish which I should add is by far my favorite cleaning, polishing, corrosion prevention/treatment product – if you could use it as hair conditioner, I probably would! This stuff is amazing! Anyway, after getting it all cleaned it looks like there is some surface corrosion which needs to be removed and treated (again, took one item off the list and added two more) but it looks like we’ll be able to salvage this one and not have to replace it.

Mast Step BEFORE (bottom 3/4 cleaned with Prism Polish)

AWESOME stuff!

Mast Step - AFTER

While on the topic of the mast, yesterday I spent a little while on the task of removing the existing rigging (while J continued to battle with the plumbing under the sink). We didn’t have a full day at Tango due to the usual weekend errands and we had a New Year’s celebration to attend, hosted by our good friends S & A, but I wanted to at least get it started. We’ve already ordered all the new wire for the rigging, and we plan to do it ourselves, but the first step is getting off the old. I was able to remove the upper fittings, the intermediate and the port lower fittings before we had to call it a day. Hopefully tomorrow I can finish that task and move on to removing and treating the corrosion on the mast – fun, fun!!